Hogan Guns - AR Style Direct Impingement Gas System. Custom Built AR Rifles in .223 and .308 Calibers

Hogan Gun H-308 12-inch Compact Defense Weapon Rifle
Item: HR308SA-12
MSRP: $2,699-$2,899
Barrel length: 12.5"
(Short Barrel Rifle - All NFA rules apply)
Action: Semi-Auto
Chamber: 7.62 x 51mm NATO (.308 Win)
Rail system: Tactical
Finish: Black Anodized, Dark Earth Cerakote, NP3™
O.D. Green Anodized, O.D. Green Cerakote
Add $200 for Cerakote finish






Gas impingement operation
The HOGAN gun system has been designed and manufactured to greatly decrease/eliminate heat, carbon build-up, gas leaks, fouling and wear/tear on operating parts which can have an adverse effect on an operating system.
Each piece of operating system is hard chrome plated and/or melonite heat treated making them almost self lubricating and act as non stick surfaces making them easy to clean and maintain.
Operates in semi-automatic, but can be made full-auto for Military and Law Enforcement.

Billet machined from 7075 aluminum bar stock, (aircraft aluminum alloy), to fit our Free Floating Monolithic rail system
Finished in black, O.D. Green Tan or Clear anodize, NP3™ or Cerakote™ Dark Earth , O.D. Green, (depending on customer preference or gun design).

Billet machined from 7075 aluminum bar stock, manufactured with an oversized grip and locking latch.
Black anodized to Mil-Spec 8625, duo colored with electro less Nickel coating/black anodize to Mil-Spec 9625 or NP3™ coated, (depending on customer preference or firearm design).

Aircraft aluminum alloy precision machined from 6061 T-6 extrusion (Free Floating Monolithic Tactical and Hunter hand guards or Monolithic top rail) finished in black, O.D. Green, Tan, or Clear anodize, NP3™ or Cerakote™ Dark Earth or O.D. Green.

.308 bolt: machined from 9310 steel bar stock, phosphate heat treated to Mil-Spec .308 and mag particle inspected, hard chrome plated.
Carrier: billet machined from single piece of 8620 steel - steel bolt carrier (machined as one piece to leave key in place). Heat treated per Mil-Spec, Nickel Teflon plated.

Smaller parts like springs, screws and washers are sourced from domestic manufacturers.
Everything in a HOGAN gun is 100% made in the U.S.A. All raw materials are manufactured from U.S. steel mills.
All heat treats, plating/coatings, are completed by U.S. owned and operated manufactures.
All accessory and component parts on weapon systems are from U.S. owned and operated manufacturers.
All HOGAN weapon systems are 100% pure American made.

Barrel blanks are supplied by Rock Creek Barrels, Inc. and completed to final specification at Hogan Guns.
Heavy contour, hand lapped button twisted rifled, 6 fluted to improve rigidity and heat dissipation, reduce weight, improve accuracy by reducing barrel vibration when firing.
4150 Mil-B-11595 chrome moly vanadium alloy (machine gun rated).
70 Rockwell case hardened heat treated “5R” polygonal barrels are 2 times harder than Mil-Spec and hammer forged barrels.
Corrosion resistant and 10 times thicker and harder than Mil-Spec chromed lining. The treatment on the barrels causes zero imperfections and is extremely smooth which also enables the barrels to consistently achieve excellent accuracy.
Chamber: 7.62 x 51mm NATO (.308 Cal) “5R” polygonal right handed 1x10 twist button rifled barrels.
Hogan X-Brake 5 prong muzzle brake and collar nut, which is remarkably effective in recoil reduction but it does not suppress the flash. Made by Hogan Guns


Billet machined from 7075-T6 aircraft aluminum alloy with integral oversized trigger guard for use with heavy gloves.
Wire E.D.M.’d flared Magwell, ambidextrous bolt release lever machined into the lower receiver. Finished in black, O.D. Green, Tan or Clear anodize, NP3™ or Cerakote™ Dark Earth or O.D. Green colors.

ERGO™ pistol grip, VLTOR™ 6-position retractable buttstock with Mil-Spec tube.
Non slip special compound rubber butt pad. Reversible for right or left handed shooters.
Finished in black, O.D. Green, Tan or Clear anodize, NP3™ or Cerakote™ Dark Earth or O.D. Green colors.

HOGAN “Gold Standard”™ trigger system, 4.5 lb. non-adjustable pull, (for zero failure) single stage competition trigger.
Trigger, hammer & disconnector E.D.M.’d from A2 tool steel. Melonite heat treated for long life.
Pin tubes are black oxide coated 8620 steel. Housing precision machined from 6061 billet aluminum. Deep gold anodize finish. High temp silicone cord base cushions.
Complete with KNS™ precision non-rotating pins.

Although we utilize P-MAG LR-308™ magazines, HOGAN firearms will fit Bushmaster, DPMS, Fulton, JP Rifles, Knights, Remington R-25, Magpul™, original AR-10 waffle magazines and any Mil-Spec .308 magazine.
Special order: Norgon™ “Ambi catch”™ mag release.

SIGHTS: (optional)
HOGAN front sight
HOGAN flip-up rear sight
HOGAN front and rear sight kit made by TROY™ Industries.

8 lbs. 15 oz. (Tactical X-Rail)
8 lbs. 14 oz. (Hunter X-Rail)

  31 3/4 inches (collapsed)
  35 3/4 inches (extended)

NP3™ Plating:
NP3™ plating: combination of a nickel alloy plating combined with Polytetrafluoethylene (Teflon). NP3™ metal finish offers many benefits.
NP3 permits firing for longer periods of time between cleaning, dirt and powder residue have no wet or oily surface to cling to.
When cleaning is required, the effort needed is minimal - usually requiring only a soft cloth.

With a unique ceramic backbone, Cerakote™ firearm coatings improve performance and reliability over conventional finishes.
This state-of-the-art coating technology out-performs any competitive coating in both laboratory settings and real world applications.

HOGAN rifles come complete with 48" black plastic hard case with foam liner
1 Magpul™ P-MAG magazine
Owner's manual
HOGAN vinyl sticker





100% Designed, Engineered and Made in the U.S.A

© Copyright 2011-14 Hogan Guns
AR Style Direct Impingement Gas System
Custom Built AR Rifles in .223 and .308 Calibers
All Rights Reserved

Hogan Manufacturing LLC, Glendale, AZ 85301 U.S.A. Phone: 623.463.1939 FAX: 623-463-1941 Orders: 888-452-0777